We have seen a tall boy fender before, and reader William decided to send along his minimalist version. Text and pictures below credited to William. Solid beer choice by the way =)
* * * * * * * * * *
I wanted a minimalist fender similar to the Tangent SL. I had an old ugly plastic fender for the mount.
Using a tallboy, I removed the top with a can opener. I cut the can lengthwise along the label seams and around the bottom using tin snips.
Eyeballing the placement on my tires, I marked the width I wanted to cover my road tires with a sharpie. I then trimmed the bent portions of the can to just wider than that with a taper. I realized that I'd have to fold the edge of the can over several times in order for the screws on the fender mounts to be able to grab hold. Experimenting with an extra piece of the aluminum can, I found that 9 folds would be sufficient. Starting with about a 2mm or 1/16th inch fold along the art/text/label vertical lines helped me keep the edges straight. The tip of pliers gave me a purchase on the aluminum for the initial bending of the metal.
Once it was bent over enough, my thumbs were more effective at completing the fold. I'd crimp the new edge with the pliers before starting the next fold. Repeat 9x on each side. After five folds, I found that it was easier to start the fold by hand as the edges were strong enough to nearly roll themselves over. Towards the end, I finished by trimming the top/bottom of the former can, now fender to be symmetrical and visually appealing once mounted. The angle for the mount I based off pictures and video of the Tangent. I haven't had the opportunity to try the fender out in puddles, so I hope I got it right!
I recently experimented with capturing my bike commute with a camera, and quickly concluded that filming my rides would only serve as a possible sleep aid. I am not a member of the quickly growing camera army, however I see them being used by more and more riders these days and we have also seen an uptick in people emailing us their camera hacks or videos they have either made or enjoyed.
I thus thought I would put together a list of DIY bike camera mount hacks. A few are off the bike, but meant for biking. Enjoy and if you have come with a hack not listed, feel free to send it to us for posting. And if you view this list and mash up your own DIY hack, feel free to send it to us as well. Lights, camera . . . Action!
1. Plastic Bottle Hack
This first hack is simple and is also flexible for use off of a bike. You can mount the screw end of platic bottle on your bars and by combining the screw top and cap with a bolt, nut, and washer combination you have your mount.
Picture Credit to eeio.blogspot.com
The beauty of this hack is that you can use it off bike as well, just put some liquid in a bottle and you have a portable tripod.
Picture credit to www.jakeludington.com
2. Repurpose an existing bike accessory mounting bracket
This is a similar concept to the first DIY mount, but is based upon repurposing a simple reflector mounting bracket.
Picture Credit to thefridaycyclotouriste.com
Around midnight last night I had an idea to mount my camera to my bike. I went out in my garage and found a bolt that fits the bottom of the camera and a part that used to attach my light to my handlebars before I moved it to my fender. I added a little gorilla glue, went to bed and this morning it was finished. I think it turned out pretty nice.
Ready to roll.
3. Plastic Clamp
The picture pretty much says it all here.
Picture credit to ossum on instructables
4. Metal Clamp
Same idea as number 3 here, just with a metal clamp instead.
Credit to dortonward on instructables
5. Affix bent metal bracket to rear wheel skewer
This first one does not look all that stable and one would want to pay particular attention to sweeping left turns.
Picture Credit to nabityphotos.com
A similar, and likely safer hack was featured on BikeHacks.com via the folks over at Montague folding bikes.
The Go Pro clip slides into one side of the base, so we kept the screw off to the other side, out of the way. The adhesive on the base also helped hold it in place.
Then we just clipped the camera into its bracket:
To mount it on the bike, we used an extra long quick release skewer. We drilled the whole large enough that it also works with a bolt on axle.
We had it angled back to get as much of the bike in the shot as possible:
6. Gear ties
I came up with this hack myself. Just take some gear ties and run them through the camera case - a bandana and some velcro made for bar stability.
This is both frightening and frighteningly simple at the same time. Reader Michael submitted his mounting hack to BikeHacks.com back in September of 2012.
8. Plastic box hack for smart phone or similar device
Over at diybiking.com there is a hack using these parts . . .
To create this . . .
9. Duct tape and cardboard
A well placed hole is this DIY solution that was submitted by reader Jessi would work. Jessi wrote:
It's made entirely out of duct tape and cardboard. I attached it to an old reflector which I then attached to my handlebars. It works great and is super secure. It holds my Droid which I use to track my speed and distance while riding. If it rains, I just slip a baggy over it to keep my phone dry.
To make the frame of the cell phone holder I used the box that manila envelopes come it. I cut a corner of it to size [leaving a little extra on the cut side to fold and tape] and then cut out the front window part. Then I just used a bunch of Duct Tape to make it more secure and colourful [I used turquoise]. I then used an old reflector and taped it to the back. I mounted it on the front handlebars which makes it closer to eye level [I use my phone to track my speed and distance]. It works great. I even hit a few potholes and it didn't move at all.
This PVC hack posted by tinram over at instructables is probably the most awkward in my opinion. You would have to be quite careful when removing the back pack, and every time you looked over your right shoulder to check out traffic you would seemingly capture your face.
11. Tripod and zip ties
This, um, interesting hack found over at coltography.ca might take the cake when it comes to most zip ties deployed in a single hack.
12. Rigging Equipment
If you want to flip the script so to speak and go all selfie with your bad self, reader Nicholas sent us this back in February. He wrote:
Out of necessity, indie band "And the Giraffe" used spare rigging equipment and a few pieces of duct tape to stabilize a film camera on the front of a bicycle for their newest music video. The setup was deceptively simple, but the resulting shots were extremely stable as the band rode around downtown Los Angeles and into the desert outside the city. The rigging was fastened to the frame of the bike and the handlebars and small pieces of duct tape were fastened into straps to help give the camera more stability on the unforgiving LA pavement.
13. Pipe clamp, inner tube, metal bracket
This elegant solution, found at the Matrix like web address drwsxce6xtjnu.cloudfront.net, ingeniously uses a pipe clamp, inner tube, and metal bracket. Very appealing and simple.
14. Accessory Extension
Not so much a DIY hack here, but I thought this picture from palmbeachbiketours.com was worth posting nonetheless. This cockpit is definitely in the running for a captain dashboard award.
If you did want to go all DIY, here is a hack from our 10 Strange Bike Handlebar Set Ups post which would allow one to go hog wild with accessories beyond a camera. Spotted by reader John at the Ala Moana shopping mall garage in Honolulu, HI.
Visiting Hawaii and was at the mall when I saw a bike locked up that has a weird hack of two short rubber tubes holding a pipe between the mountain bar extensions to create a rectangular upright bar for the rider.
15. Rear pole mount
Reader Andy sent me a link to this reddit post which features a pole hack which gives a 3rd person view of the rider. The dude in the video spends like $150 on this, mainly due to using a carbon fiber pole (Fred alert), but a broom stick would be a cheap substitute. Screen shot from YouTube video -
YouTube video of the hack in action -
16. PVC side mount
Over at mtbr.com contributer anthonyi came up with a hack similar to #13 on the list.
17. PVC 360 Swivel Mount
For the action hero out there, with some PVC tube and some bolts, you can capture your epic exploits. Not advisable for those who prone to falling.
18. Repurpose those eyelets
Using eyelets to mount a bracket could work on both the front and back. Credit to contributor sickmtbnutca over at mtbr.com.
With a sharp object and a pipe clamp, contributor fehlbergo came up with this over at instructables.
I had never hear of corian solid surfacing, but with a drill and saw, instructable contributor marple200 fashioned a very cool seat mount that looks like it came out of a factory.
Sometimes the style associated with a hack makes it truly awesome, and I saved this one for last because the style factor is off the charts. This one is pretty simple, but requires a full helmet - and having a mullet seals the deal. Visit John Shafer's article at mtbr.com for more.
Have a hack that did not make the list? Feel free to send us an email and let us know so we can post.
I have seen all sorts of bike bells, however reader Randy sent along this ingenious little bike bell hack. If you have a brake you are not using because of a drivetrain change, this is pretty cool. Using a cable to engage a hack is something we also recently saw with a suspension fork lock out hack.
Saw this bike leaning up outside a grocery store in Victoria, BC.
A front fork was bolted onto the rear dropouts, with a little scrap metal holding it away from the seatpost. The stem of the fork was jammed through a hole in the bottom of a plastic garbage can to make an oddball sort of carrier.
Most bike companies talk about the stiffness and compliance of frames, but reader Nick's use of his frame for leverage must make bike company reps cringe. Nick blogs at bicycleobsession and the following text and picture are credited to his site.
How to remove a stubborn cassette lockring without special tools? Or anything stubborn like pedals, bottom bracket and crankset bolt? Just use your own frame! Put your spanner inside the bare headtube (leave it free from any parts) and use the entire frame as a powerful extender. It will work on anything, trust me.
In the area where I live it is common to walk by piles of garbage. Urban area garbage viewing would make a great TV series if you ask me. Maybe I should propose a partnership with Morgan Spurlock for a series. I always have my eye out because sometimes one person's trash is another person's treasure. Such was the case after the recent running of the Boston Marathon. On my way home from an errand I spotted this sign atop a giant heap of garbage.
Some readers might remember that I added a basket to the back of my bike. I had always planned to line the basket but in the interim had just put a piece of cardboard on the bottom. This was a perfect solution to what I wanted to do, and it was the perfect size as well. I cut out the corners . . .
. . . and it fit perfectly in my basket.
Zip tied on each side, it has performed like a champ so far.
Reader Bruno was looking for a way to carry miscellaneous stuff with him and he sent along a hack he came up with. His hack reminded me of a DIY Box of my own I created a few years ago. Here was mine . . .
And here is Bruno's write up and pictures . . . the only thing I question is the length of the bolts on the inside. For mine I put the bolts the other way around (facing out rather than in) and used wing nuts so I could easily take it off if I wanted to.
* * * * * * * * * * * * * * *
So I needed a bike box to put all that stuff that I have to carry when riding. Things like tools, lights and stuff. I searched some bike stores, all the boxes I found were very expensive and some of them seemed to be fragile. Then I searched this awesome site and found some ideas. I had this Whey Protein Package just lying in my house and decided to put it to good use!
I did some modifications and now I have a big, tough and very red bike box! The project is very simple and I spent a total of 2 dollars (without the cost of the whey protein). The two holes I did on the lid are so I can use a lock, as you can see on the pictures